FOXBORO FBM44 Intelligent Transmitter Interface
Foxboro FBM44 is a dual baud rate intelligent transmitter interface with 0–20 mA output for I/A Series systems. It gives four Foxboro intelligent transmitters a digital channel into the redundant 2 Mbps Fieldbus at a software-selectable 4800 or 600 baud, while passing the simultaneous 4–20 mA signal, and adds four 0–20 mA analog outputs in the same module. The 200 Ω channel impedance removes the need for an external resistor, and loop supply is 23.5 V at 20.5 mA. Digital mode cable runs to 600 m, analog mode 1800 m.
El Foxboro FBM44 es una interfaz de transmisores inteligentes de doble velocidad de transmisión con salida de 0–20 mA para sistemas I/A Series. Proporciona a cuatro transmisores inteligentes Foxboro un canal digital hacia el Fieldbus redundante de 2 Mbps a 4800 o 600 baudios seleccionables por software, dejando pasar simultáneamente la señal de 4–20 mA, y añade cuatro salidas analógicas de 0–20 mA en el mismo módulo. La impedancia de canal de 200 Ω elimina la necesidad de resistencia externa y la alimentación del lazo es de 23.5 V a 20.5 mA. En modo digital el cable llega a 600 m; en analógico a 1800 m.
•Manager: Tiana Lai
•E-mail: ydf8801@163.com
•Tel:+8613666014880(WhatsApp/WeChat)
•Ship to you via Fedex/DHL/TNT/UPS/EMS
•Package: Original packing with cartons
FOXBORO FBM44 Intelligent Transmitter Interface
The Foxboro FBM44 is a Dual Baud Rate Intelligent Transmitter Interface with 0–20 mA output, a main Fieldbus Module of the I/A Series 200 Series. It gives four Intelligent Transmitters a digital channel into the redundant 2 Mbps module Fieldbus and provides four 0–20 mA analog output channels in the same module. Each transmitter channel carries the transmitter’s FSK digital signal — software-selectable at 4800 or 600 baud — while simultaneously passing the 4–20 mA analog signal, and supplies loop power without any external resistance. It is the module used where Foxboro Intelligent Transmitters must be read digitally and analog outputs driven from one slot.
Key Specifications
- Manufacturer: Foxboro
- Model / Part Number: FBM44
- Product Family: I/A Series 200 Series Fieldbus Modules
- Product Type: Dual Baud Rate Intelligent Transmitter Interface with 0–20 mA Output
- Module Kind: Main module, self-executing application program
- Intelligent Transmitter Channels: 4 (digital communication only)
- Baud Rate: Software-selectable 4800 or 600 baud (set by transmitter or Hand-Held Terminal)
- Analog Output Channels: 4 × 0–20 mA
- Analog Input Channels: 0 (transmitter data travels on the digital channel)
- Fieldbus: Redundant 2 Mbps module Fieldbus, dual transceivers, either path A or B
- Channel Impedance: 200 Ω
- Loop Supply (Analog Mode): 23.5 V at 20.5 mA
- External Resistance Required: None — the channel provides it
- Max Cable Length: 600 m (2000 ft) digital mode; 1800 m (6000 ft) analog mode
- Max Loop Load, Digital Mode: 450 Ω (excluding transmitter, FBM and HHT)
- Output Configurable Options: Fail-safe configuration (hold/fallback) and fallback data
- Termination: Dedicated termination cable assembly (front connector plus field terminal block)
- Calibration: Factory calibrated, no field calibration, no jumpers or manual controls
- Diagnostics: Status LEDs on the termination connector
- Power: Redundant dc/dc converter inputs from the backplane
- Reference Specification: PSS 21H-2D4 B4
Key Features
- Digital Transmitter Reading: Reads Foxboro Intelligent Transmitters digitally, so measurement data does not depend on the 4–20 mA analog value.
- Dual Baud Rate: Each channel runs at 4800 or 600 baud, software-selected — the 600 baud setting still allows the simultaneous 4–20 mA signal to pass for shutdown or backup use.
- Integrated 0–20 mA Outputs: Four analog output channels in the same module reduce the module count in a rack.
- No External Resistor: The 200 Ω channel impedance removes the field resistor normally needed to sense HART/FSK communication.
- Common Supply Operation: With the Cable Balun Module P0903SV, several 4–20 mA Intelligent Transmitter loops can be powered from one external supply (the balun adds 28 Ω dc loop resistance).
- Redundant Fieldbus Paths: Dual transceivers accept communication from either path of the redundant Fieldbus.
- No Field Calibration: Factory-calibrated analog channels; no module jumpers or manual controls.
Typical Applications
- Digitally reading Foxboro Intelligent Transmitters (pressure, temperature, magnetic flow) on I/A Series systems
- Loops where the analog 4–20 mA signal must remain available alongside digital communication
- Marshalling of multiple Intelligent Transmitter loops from a single power supply via the Cable Balun Module
- Driving 0–20 mA final elements from the same module that reads the transmitters
Ordering Notes
- FBM44 is not FBM43: FBM43 has eight Intelligent Transmitter channels and no analog outputs; FBM44 has four transmitter channels plus four 0–20 mA outputs.
- Not an analog input module: The FBM44 has no analog input channels — do not order it to replace an FBM01/FBM04 style input module.
- Matching termination cable: Each module requires its own termination cable assembly; the field terminal block type must match the enclosure.
- Replacement check: Confirm against the installed configuration (module type, baud rate setting and output fail-safe mode) before swapping.

FOXBORO FBM44 Interfaz de transmisores inteligentes
Descripción general del producto
El Foxboro FBM44 es una Interfaz de Transmisores Inteligentes de doble velocidad de transmisión (Dual Baud Rate) con salida de 0–20 mA, módulo Fieldbus principal de la serie 200 de I/A Series. Proporciona a cuatro transmisores inteligentes un canal digital hacia el Fieldbus redundante de 2 Mbps y ofrece cuatro canales de salida analógica de 0–20 mA en el mismo módulo. Cada canal de transmisor transporta la señal digital FSK del transmisor — seleccionable por software a 4800 o 600 baudios — mientras deja pasar simultáneamente la señal analógica de 4–20 mA, y alimenta el lazo sin resistencia externa. Es el módulo indicado cuando los transmisores inteligentes Foxboro deben leerse digitalmente y excitar salidas analógicas desde una sola ranura.
Especificaciones clave
- Fabricante: Foxboro (heritage Invensys / Schneider Electric)
- Modelo / Número de parte: FBM44
- Familia de producto: Módulos Fieldbus serie 200 I/A Series
- Tipo de producto: Interfaz de transmisores inteligentes de doble velocidad con salida de 0–20 mA
- Tipo de módulo: Módulo principal, programa de aplicación de ejecución propia
- Canales de transmisor inteligente: 4 (solo comunicación digital)
- Velocidad de transmisión: 4800 o 600 baudios, seleccionable por software (desde el transmisor o el terminal manual)
- Canales de salida analógica: 4 × 0–20 mA
- Canales de entrada analógica: 0 (los datos del transmisor viajan por el canal digital)
- Fieldbus: Fieldbus de módulo redundante de 2 Mbps, transceptores duales, ruta A o B
- Impedancia de canal: 200 Ω
- Alimentación del lazo (modo analógico): 23.5 V a 20.5 mA
- Resistencia externa requerida: Ninguna — la aporta el canal
- Longitud máxima de cable: 600 m (2000 ft) en modo digital; 1800 m (6000 ft) en modo analógico
- Carga máxima del lazo, modo digital: 450 Ω (excluyendo transmisor, FBM y HHT)
- Opciones configurables de salida: Configuración de fallo seguro (hold/fallback) y datos de fallback
- Terminación: Conjunto de cable de terminación dedicado (conector frontal más bloque de terminales de campo)
- Calibración: Calibrado de fábrica, sin calibración de campo, sin puentes ni controles manuales
- Diagnóstico: LED de estado en el conector de terminación
- Alimentación: Entradas redundantes del convertidor CC/CC desde el backplane
- Especificación de referencia: PSS 21H-2D4 B4
Características principales
- Lectura digital del transmisor: Lee digitalmente los transmisores inteligentes Foxboro, de modo que el dato de medida no depende del valor analógico de 4–20 mA.
- Doble velocidad de transmisión: Cada canal opera a 4800 o 600 baudios, seleccionado por software — a 600 baudios la señal de 4–20 mA puede seguir pasando simultáneamente para uso de parada de emergencia o respaldo.
- Salidas de 0–20 mA integradas: Cuatro canales de salida analógica en el mismo módulo reducen el número de módulos en el rack.
- Sin resistencia externa: La impedancia de canal de 200 Ω elimina la resistencia de campo normalmente necesaria para detectar la comunicación HART/FSK.
- Operación con fuente común: Con el Cable Balun Module P0903SV, varios lazos de transmisores inteligentes de 4–20 mA pueden alimentarse desde una sola fuente externa (el balun añade 28 Ω de resistencia CC al lazo).
- Rutas Fieldbus redundantes: Transceptores duales que aceptan comunicación desde cualquiera de las dos rutas del Fieldbus redundante.
- Sin calibración de campo: Canales analógicos calibrados de fábrica; sin puentes ni controles manuales en el módulo.
Aplicaciones típicas
- Lectura digital de transmisores inteligentes Foxboro (presión, temperatura, caudal magnético) en sistemas I/A Series
- Lazos donde la señal analógica de 4–20 mA debe permanecer disponible junto a la comunicación digital
- Concentración de varios lazos de transmisores inteligentes desde una sola fuente mediante el Cable Balun Module
- Excitación de elementos finales de 0–20 mA desde el mismo módulo que lee los transmisores
Notas para el pedido
- FBM44 no es FBM43: El FBM43 tiene ocho canales de transmisor inteligente y ninguna salida analógica; el FBM44 tiene cuatro canales de transmisor más cuatro salidas de 0–20 mA.
- No es un módulo de entrada analógica: El FBM44 no tiene canales de entrada analógica — no lo pida para sustituir un módulo de entrada tipo FBM01/FBM04.
- Cable de terminación correspondiente: Cada módulo requiere su propio conjunto de cable de terminación; el tipo de bloque de terminales de campo debe coincidir con el gabinete.
- Verificación antes de sustituir: Confirme contra la configuración instalada (tipo de módulo, ajuste de velocidad de transmisión y modo de fallo seguro de salida).
✔Sales of the brand:
ABB、EPRO、GE、FOXBORO、Schneider、Rexroth、Honeywell、Bently、YASKAWA other global DCS system and PLC system, servo system of famous industrial brand.
☀️Tiana Lai(Sales Director)
?Email: ydf8801@163.com
?Tel:+8613666014880(WhatsApp/WeChat)
?️Ship to you via DHL/TNT/UPS/EMS/Fedex
?Product Condition: One-year warranty

Company Overview
Main Products
We specialize in supplying original imported spare parts for DCS, PLC, robotics, and large servo systems from leading global brands, including:
- FOXBORO | EMERSON | TRICONEX | XYCOM | BENTLY
- ROCKWELL | ABB | GE | Aen-Brady | YOKOGAWA
- HONEYWELL | RELIANCE | SCHNEIDER | MODICON
- Westinghouse | WOODWARD | Motorola | Rexroth | SEW
Quick delivery of spot goods and quality assurance – your trusted purchasing partner!
? Spot inventory, same day shipment
All products are in sufficient stock reserve. After you place an order, we will arrange shipment on the same day to minimize waiting time and help your project progress quickly.
? Flexible payment, easy transaction
Support multiple payment methods, including mainstream settlement methods such as T/T, which are safe and convenient, meet the needs of different customers, and make cross-border transactions more worry free.
?️ One year warranty, worry free after-sales service
We offer a one-year warranty service for all products! If there are any quality issues, we will provide you with professional after-sales support as soon as possible and provide full protection throughout the process.
? Global express delivery, secure delivery
We have deep cooperation with well-known domestic and foreign logistics companies such as SF Express, DHL, FEDEX, etc., to ensure that every shipment can be safely, timely, and efficiently delivered, allowing you to receive your goods without worry.
? 24/7 customer service, online response
You can contact us anytime and anywhere through email. Our professional team will be available 24 hours a day to answer your questions and provide attentive service.
Choosing us means choosing speed, quality, and trust!
Contact us immediately to embark on a new experience of efficient procurement! ✨
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Allen Bradley 1756-IF8 ControlLogix Analog Input Module
Allen Bradley 1769-L30 CompactLogix Controller
Allen Bradley 1746-IA8 SLC 8 Point AC Input Module
Allen Bradley 1756-IR6I ControlLogix RTD Input Module
Allen Bradley 1402-LS51 Line Synchronization Module
Allen Bradley 2711-K5A2 PanelView 550 Operator Terminal
Allen Bradley 1756-L55M14 ControlLogix5555 Controller
1756-OB8 ControlLogix 10 to 30 V DC Output Module
1756-OB8 ControlLogix 10 to 30 V DC Output Module is an 8-point digital DC output module that switches 10–30V DC field devices such as solenoids, relays, indicators, and contactors from a ControlLogix controller. Each of the 8 outputs is rated up to 2 A and wired through a 20-pin removable terminal block. The module mounts in a 1756 ControlLogix chassis for local or remote racks over ControlNet or EtherNet/IP, suiting discrete control, machine automation, and process applications.
•Manager: Tiana Lai •E-mail: ydf8801@163.com •Ship to you via Fedex/DHL/TNT/UPS/EMS •Package: Original packing with cartons


Reviews
There are no reviews yet.