METSO A413140 Digital Output Board

Metso A413140 is the Form A/B relay output module of the Metso maxPAC I/O subsystem, bringing sixteen relay outputs onto one plug-in card for the maxDNA distributed control system. Its contacts give the controller true dry-contact switching for interposing circuits, contactors, solenoids and annunciators, with a status LED on the front panel for every output. Jumpers on the card set its operating options, the module takes one bus address in its chassis, and two cards can be wired as a redundant pair with a common end element. •Manager: Tiana Lai •E-mail: ydf8801@163.com •Tel:+8613666014880(WhatsApp/WeChat) •Ship to you via Fedex/DHL/TNT/UPS/EMS •Package: Original packing with cartons

METSO A413111 Circuit Board Assembly

Metso A413111 is the Form A/B relay output module of the Metso maxPAC I/O subsystem, bringing sixteen relay outputs onto one plug-in card for the maxDNA distributed control system. Its contacts give the controller true dry-contact switching for interposing circuits, contactors, solenoids and annunciators, with a status LED on the front panel for every output. Jumpers on the card set its operating options, the module takes one bus address in its chassis, and two cards can be wired as a redundant pair with a common end element. •Manager: Tiana Lai •E-mail: ydf8801@163.com •Tel:+8613666014880(WhatsApp/WeChat) •Ship to you via Fedex/DHL/TNT/UPS/EMS •Package: Original packing with cartons

METSO S420154 Interface Control Board

Metso S420154 is the Form A/B relay output module of the Metso maxPAC I/O subsystem, bringing sixteen relay outputs onto one plug-in card for the maxDNA distributed control system. Its contacts give the controller true dry-contact switching for interposing circuits, contactors, solenoids and annunciators, with a status LED on the front panel for every output. Jumpers on the card set its operating options, the module takes one bus address in its chassis, and two cards can be wired as a redundant pair with a common end element. •Manager: Tiana Lai •E-mail: ydf8801@163.com •Tel:+8613666014880(WhatsApp/WeChat) •Ship to you via Fedex/DHL/TNT/UPS/EMS •Package: Original packing with cartons

METSO R I TB 9139041 RTD Input Terminal Block

Metso R I TB 9139041 is the Form A/B relay output module of the Metso maxPAC I/O subsystem, bringing sixteen relay outputs onto one plug-in card for the maxDNA distributed control system. Its contacts give the controller true dry-contact switching for interposing circuits, contactors, solenoids and annunciators, with a status LED on the front panel for every output. Jumpers on the card set its operating options, the module takes one bus address in its chassis, and two cards can be wired as a redundant pair with a common end element. •Manager: Tiana Lai •E-mail: ydf8801@163.com •Tel:+8613666014880(WhatsApp/WeChat) •Ship to you via Fedex/DHL/TNT/UPS/EMS •Package: Original packing with cartons

METSO A413654 Control Interface Board

Metso A413654 is the Form A/B relay output module of the Metso maxPAC I/O subsystem, bringing sixteen relay outputs onto one plug-in card for the maxDNA distributed control system. Its contacts give the controller true dry-contact switching for interposing circuits, contactors, solenoids and annunciators, with a status LED on the front panel for every output. Jumpers on the card set its operating options, the module takes one bus address in its chassis, and two cards can be wired as a redundant pair with a common end element. •Manager: Tiana Lai •E-mail: ydf8801@163.com •Tel:+8613666014880(WhatsApp/WeChat) •Ship to you via Fedex/DHL/TNT/UPS/EMS •Package: Original packing with cartons

METSO A413222 Fiber Ethernet Communication Board

Metso A413222 is the Form A/B relay output module of the Metso maxPAC I/O subsystem, bringing sixteen relay outputs onto one plug-in card for the maxDNA distributed control system. Its contacts give the controller true dry-contact switching for interposing circuits, contactors, solenoids and annunciators, with a status LED on the front panel for every output. Jumpers on the card set its operating options, the module takes one bus address in its chassis, and two cards can be wired as a redundant pair with a common end element. •Manager: Tiana Lai •E-mail: ydf8801@163.com •Tel:+8613666014880(WhatsApp/WeChat) •Ship to you via Fedex/DHL/TNT/UPS/EMS •Package: Original packing with cartons

METSO D201380 Analog Input Board

Metso D201380 is the Form A/B relay output module of the Metso maxPAC I/O subsystem, bringing sixteen relay outputs onto one plug-in card for the maxDNA distributed control system. Its contacts give the controller true dry-contact switching for interposing circuits, contactors, solenoids and annunciators, with a status LED on the front panel for every output. Jumpers on the card set its operating options, the module takes one bus address in its chassis, and two cards can be wired as a redundant pair with a common end element. •Manager: Tiana Lai •E-mail: ydf8801@163.com •Tel:+8613666014880(WhatsApp/WeChat) •Ship to you via Fedex/DHL/TNT/UPS/EMS •Package: Original packing with cartons

METSO A413160 Binary Output Board

Metso A413160 is the Form A/B relay output module of the Metso maxPAC I/O subsystem, bringing sixteen relay outputs onto one plug-in card for the maxDNA distributed control system. Its contacts give the controller true dry-contact switching for interposing circuits, contactors, solenoids and annunciators, with a status LED on the front panel for every output. Jumpers on the card set its operating options, the module takes one bus address in its chassis, and two cards can be wired as a redundant pair with a common end element. •Manager: Tiana Lai •E-mail: ydf8801@163.com •Tel:+8613666014880(WhatsApp/WeChat) •Ship to you via Fedex/DHL/TNT/UPS/EMS •Package: Original packing with cartons

METSO IOP351 16 Channel Relay Output Module

Metso IOP351 is the Form A/B relay output module of the Metso maxPAC I/O subsystem, bringing sixteen relay outputs onto one plug-in card for the maxDNA distributed control system. Its contacts give the controller true dry-contact switching for interposing circuits, contactors, solenoids and annunciators, with a status LED on the front panel for every output. Jumpers on the card set its operating options, the module takes one bus address in its chassis, and two cards can be wired as a redundant pair with a common end element. •Manager: Tiana Lai •E-mail: ydf8801@163.com •Tel:+8613666014880(WhatsApp/WeChat) •Ship to you via Fedex/DHL/TNT/UPS/EMS •Package: Original packing with cartons

METSO IOP331 16 Channel Digital Input 48 VDC

Metso IOP331 is the 48 V common input module of the Metso maxPAC I/O subsystem, carrying sixteen digital inputs on one plug-in card for the maxDNA distributed control system. It reads 48 V DC wetting signals from field contacts, limit switches and relay outputs, with a red LED per channel on the front panel plus a green Active LED for power and DPU communication. The channels share a common return, the card takes one bus address in the digital input range, and two cards can be wired as a redundant pair. •Manager: Tiana Lai •E-mail: ydf8801@163.com •Tel:+8613666014880(WhatsApp/WeChat) •Ship to you via Fedex/DHL/TNT/UPS/EMS •Package: Original packing with cartons

METSO IOP302 16 Channel 4 to 20 mA Input Module

Metso IOP302 is an analog input card for the Metso Damatic XD and Valmet DNA automation platform, built as a plug-in PCB board that slots into the I/O rack and brings field analog measurement signals into the control system's input data. Status LEDs on the front edge show the card's operating state from the cabinet face, and the board is exchanged at card level without touching the rack's field wiring. Board-level item with the front bracket carrying its identification. •Manager: Tiana Lai •E-mail: ydf8801@163.com •Tel:+8613666014880(WhatsApp/WeChat) •Ship to you via Fedex/DHL/TNT/UPS/EMS •Package: Original packing with cartons

METSO D200175 ACN RT Node Communication Board

Metso D200175 is an analog input card for the Metso Damatic XD and Valmet DNA automation platform, built as a plug-in PCB board that slots into the I/O rack and brings field analog measurement signals into the control system's input data. Status LEDs on the front edge show the card's operating state from the cabinet face, and the board is exchanged at card level without touching the rack's field wiring. Board-level item with the front bracket carrying its identification. •Manager: Tiana Lai •E-mail: ydf8801@163.com •Tel:+8613666014880(WhatsApp/WeChat) •Ship to you via Fedex/DHL/TNT/UPS/EMS •Package: Original packing with cartons