Blog
ABB 5SDF0860H0003 Fast Recovery Diode for Medium Voltage Drives
ABB 5SDF0860H0003 Fast Recovery Diode for Medium Voltage Drives

Medium voltage drives move enormous amounts of power, and the devices that carry that power are the heart of the machine. The ABB 5SDF0860H0003, product ID 3BHL000397P0001, is one of those devices. It is a 68 mm press-pack fast recovery diode with a 6 kV blocking voltage, built by ABB for high-power converter stacks, including the medium voltage drives that run pumps, fans, compressors, and process trains across heavy industry. This article explains what the device is, why its construction matters, and where it is used.
What the 5SDF0860H0003 Is
The 5SDF0860H0003 is a disc-type, press-pack power diode from ABB’s 5SDF high-power diode family. Its catalog description is explicit: a 68 mm diode rated at 6 kV. The 68 mm figure refers to the diameter of the device’s contact pole pieces, the standard size class for high-current press-pack semiconductors. The 6 kV figure is the reverse blocking voltage class, which places the device in the medium voltage range rather than in low voltage industrial electronics.
Mechanically, a press-pack diode is not a soldered module. A silicon wafer is mounted between molybdenum discs inside a hermetic ceramic housing, and the whole assembly is clamped between heatsinks under a defined mechanical force. Electrical contact and heat transfer both depend on that clamping pressure rather than on solder joints or bond wires. ABB manufactures this device within its power semiconductor operations in Finland.
Key Advantages of the 5SDF0860H0003
6 kV Blocking Voltage
The 6 kV rating gives converter designers the voltage headroom they need for medium voltage DC links and series-connected power stacks. A higher blocking voltage per device means fewer devices in series for a given system voltage, which simplifies the mechanical stack, the gate or trigger circuitry around it, and the insulation coordination of the whole converter.
Solder-Free Press-Pack Construction
Press-pack construction eliminates the solder joints and wire bonds that limit the life of conventional power modules. The clamped contact structure is mechanically robust and tolerates repeated thermal cycling, which is exactly the duty a drive diode sees over years of load swings. There is no bond wire to lift and no solder layer to fatigue.
Double-Sided Cooling
Because the wafer is clamped between two pole pieces, heat can be extracted from both sides of the device. Double-sided cooling lowers the thermal resistance of the stack and allows higher current density in a compact mechanical envelope, a decisive advantage in drives where cabinet space and cooling capacity are fixed.
Fast Recovery Characteristics
As a member of ABB’s fast recovery diode family, the device is designed for fast switching duty with low reverse recovery losses. In freewheeling and rectifier positions, fast recovery reduces switching losses and keeps the converter efficient, while limiting the electrical stress that recovery current imposes on the other semiconductors in the stack.
High Surge Current Capability
Press-pack diodes present a large silicon area and a robust internal contact, giving them strong surge current capability. In a drive, this matters during energization, during fault conditions, and whenever the converter must absorb a short, intense current pulse without failing.
Predictable Failure Mode
Press-pack devices are valued for failing in a defined way, typically into a low-impedance state that the converter’s protection system can detect and handle. That behavior supports coordinated protection design and helps contain the consequences of a device failure inside the power stack.
Serviceability in the Stack
A press-pack diode is replaced by releasing the clamp, removing the device, and installing a new one at the specified clamping force. There is no desoldering, no reflow process, and no need to replace an entire module assembly, which keeps maintenance work inside the drive short and predictable.
Application Scenarios
ABB ACS1000 Medium Voltage Drives
The 5SDF0860H0003 is associated with ABB’s ACS1000 medium voltage drive family, where it serves in the power stack. In this role it handles rectification and freewheeling of the currents that flow between the supply, the DC link, and the motor, forming part of the conversion chain that lets the drive control a large industrial machine with variable speed.
Rectifier and Freewheeling Positions in High-Power Converters
In any high-power converter that needs a robust, fast-recovering diode, the device fits the rectifier and freewheeling functions. Its 6 kV class and press-pack construction suit stacks that operate at medium voltage with high current and continuous duty.
Industrial Drives for Pumps, Fans, and Compressors
Utilities, water operations, cement plants, mines, and process industries run large pumps, fans, and compressors on medium voltage drives. When those drives need power-stack replacement or refurbishment, a diode of this class restores the conversion chain to its original design.
Drive Maintenance and Stack Refurbishment
In maintenance programs, the 5SDF0860H0003 is a line item for stack refurbishment: the device is replaced during scheduled overhauls or after a diagnosed diode failure, and the drive returns to service with its original thermal and electrical design intact.
Heavy Industry Power Conversion
Electrolysis, large rectifier plants, and other heavy-current conversion installations rely on high-power diodes for rectification. The press-pack format and 6 kV rating make the device relevant wherever robust, high-current rectification is required.
Selection and Installation Notes
Confirm the marking before installation: the device is identified by part number 5SDF0860H0003 and product ID 3BHL000397P0001, in the 68 mm, 6 kV class. Follow ABB’s clamping procedure precisely, including the specified clamping force, the condition of the heatsink contact surfaces, and the cleanliness of the contact faces. Store the device in its original sealed packaging, and handle it by the housing rather than by the contact surfaces.

Conclusion
The ABB 5SDF0860H0003 is a 68 mm, 6 kV press-pack fast recovery diode built for the demanding power stacks of medium voltage drives. Its solder-free construction, double-sided cooling, fast recovery behavior, and serviceable format make it a dependable choice for ACS1000 drives and other high-power converters, and a component worth specifying correctly and stocking with care.
FAQ
What is the ABB 5SDF0860H0003?
It is a 68 mm press-pack fast recovery power diode rated at 6 kV, identified by product ID 3BHL000397P0001.
Where is the 5SDF0860H0003 used?
It is used in high-power converter stacks, including ABB ACS1000 medium voltage drives, in rectifier and freewheeling positions.
Why use a press-pack diode instead of a module?
Press-pack construction removes solder joints and bond wires, provides double-sided cooling, offers high surge capability, and allows replacement by re-clamping rather than re-soldering.
