MOOG D136E001-001 MSC I Programmable Motion Processor Module
MOOG D136E001-001 MSC I Programmable Motion Processor Module
The Moog D136E001-001 is an MSC programmable multi-axis controller in the M3000 family, supplied as the 2 MB RAM variant with digital open-emitter outputs. Built around a 40 MHz 32-bit PowerPC RISC processor with floating-point unit, it stores the boot project and retain data in 4 MB Flash EEPROM with over 10-year retention and no backup battery. Programmed with the MACS IEC 61131 environment, it provides Ethernet, dual CAN, two RS 232 ports and an E-bus for up to seven expansion modules, making it a replacement spare for legacy Moog motion-control cabinets.
•Manager: Tiana Lai
•E-mail: ydf8801@163.com
•Tel: + 8613666014880(WhatsApp/WeChat)
•Ship to you via Fedex/DHL/TNT/UPS/EMS
•Package: Original packing with cartons
MOOG D136E001-001 MSC I Programmable Motion Processor Module

Overview
The Moog D136E001-001 is an MSC programmable multi-axis servo controller of the Moog M3000 control system family, built for fast closed-loop control of position, speed and power in both hydraulic and electric drives. It is the 2 MB RAM hardware variant of the MSC line, fitted with digital open-emitter outputs, and programmed with the MACS (Moog Axis Control Software) development environment compliant with IEC 61131. As a DIN-rail mounted control module, the MSC can act as the E-bus master for up to seven local M3000 extension modules and connect to higher-level equipment over Ethernet, CAN or serial interfaces.
Product Identification
- Order Number: D136E001-001
- Family: Moog MSC (Moog Servo Controller), M3000 Control System
- Official Type: Programmable multi-axis controller (MSC control module)
- Hardware Variant: Digital open-emitter outputs, 2 MB RAM
- Programming: MACS development environment, IEC 61131
- Mounting: NS 35 DIN top-hat rail
- Manufacturer: Moog GmbH / Moog Inc.
Processor and Memory
- Processor: PowerPC CPU, 32-bit RISC architecture with floating-point unit, 40 MHz
- RAM: 2 MB
- Non-volatile memory: 4 MB Flash EEPROM; data retention typically over 10 years
- Power-failure behavior: Boot project, RETAIN variables and error messages are kept in Flash EEPROM; no backup battery required
- Typical control task: Fast closed loops for position, velocity and power, expandable with M3000 I/O modules
Communication and Fieldbus Interfaces
- Ethernet front-panel port for controller, development environment or visualization communication
- Two independent CAN interfaces: WideCAN with two front-panel WCAN connectors (internally connected 1:1) and LocalCAN on the lateral E-bus connectors
- Two serial TIA/EIA 232 (RS 232) ports: MACS programming port and a free user SIO port
- E-bus on both lateral Q-connectors, allowing the MSC to master up to seven local I/O extension modules
- F-Bus front connector reserved for optional fieldbus extension (for example PROFIBUS); the D136E001-001 itself does not ship with a PROFIBUS DP interface
Sensor and Signal Interfaces
- Two digital sensor interfaces per TIA/EIA 422 (RS 422) for SSI position transducers or incremental encoders
- Digital open-emitter outputs for switched control signals
- Local I/O expansion through QDIO digital modules and QAIO analog modules on the E-bus
- Status and diagnostic LEDs, including activity indicators for the serial, CAN, Ethernet and optional fieldbus ports
Application Fields
- Position, velocity and force/power closed-loop control on hydraulic and electric axes
- Single- and multi-axis machine control in presses, test rigs, molding and metalforming equipment
- Replacement and spare-part support for existing Moog M3000 / MSC based machinery
- Stand-alone E-bus master for local distributed I/O groups
- CAN-linked distributed automation cells with Moog remote I/O and display modules
Installation and Wiring Notes
- Mount on a standard 35 mm DIN top-hat rail inside a protected control cabinet
- Important: the L2+/M2 supply terminals of the D136E001-001 are not reverse-polarity protected; reversing polarity on these terminals causes permanent damage to the MSC. Observe the terminal polarity markings carefully
- The L1+/M1 supply terminals and the other M3000 module supply terminals are reverse-polarity protected; reversed polarity simply prevents operation
- Load the application project through the MACS serial programming port after commissioning the hardware
- Configure the E-bus slaves in the MACS PLC configuration before enabling the I/O
- Back up the original program before swapping the controller so the spare unit can be loaded with identical logic
FAQ
Q: What is the Moog D136E001-001? A: It is an MSC programmable multi-axis controller in the M3000 family, the 2 MB RAM variant with digital open-emitter outputs, used for closed-loop motion control.
Q: Does the D136E001-001 have a PROFIBUS DP interface? A: No. Its F-Bus connector only supports an optional fieldbus extension; the PROFIBUS-DP slave feature belongs to the separate 4 MB variant D136-001-007.
Q: How does it differ from D136-001-008 and D136-001-007? A: The D136E001-001 has 2 MB RAM; the D136-001-008 has 4 MB RAM, and the D136-001-007 adds the PROFIBUS-DP slave interface.
Q: Which software programs the D136E001-001? A: The MACS (Moog Axis Control Software) development environment based on IEC 61131.
Q: What critical wiring caution applies to this model? A: Its L2+/M2 power terminals are not reverse-polarity protected; connect 24 V DC with correct polarity to avoid permanent damage.
Q: What drives can it control? A: Hydraulic and electric drives, with closed-loop regulation of position, speed and power; the MSC platform targets fast, precise actuator control rather than acting as a motor drive amplifier itself.
🖋Sales of the brand:
ABB、EPRO、GE、FOXBORO、Schneider、Rexroth、Honeywell、Bently、YASKAWA other global DCS system and PLC system, servo system of famous industrial brand.
☀️Tiana Lai(Sales Director)
?Email: ydf8801@163.com
?Tel: + 8613666014880(WhatsApp/WeChat)
?️Ship to you via DHL/TNT/UPS/EMS/Fedex
?Product Condition: One-year warranty

Company Overview
Main Products
We specialize in supplying original imported spare parts for DCS, PLC, robotics, and large servo systems from leading global brands, including:
- FOXBORO | EMERSON | TRICONEX | XYCOM | BENTLY
- ROCKWELL | ABB | GE | Aen-Brady | YOKOGAWA
- HONEYWELL | RELIANCE | SCHNEIDER | MODICON
- Westinghouse | WOODWARD | Motorola | Rexroth | SEW
Quick delivery of spot goods and quality assurance – your trusted purchasing partner!
? Spot inventory, same day shipment
All products are in sufficient stock reserve. After you place an order, we will arrange shipment on the same day to minimize waiting time and help your project progress quickly.
? Flexible payment, easy transaction
Support multiple payment methods, including mainstream settlement methods such as T/T, which are safe and convenient, meet the needs of different customers, and make cross-border transactions more worry free.
?️ One year warranty, worry free after-sales service
We offer a one-year warranty service for all products! If there are any quality issues, we will provide you with professional after-sales support as soon as possible and provide full protection throughout the process.
? Global express delivery, secure delivery
We have deep cooperation with well-known domestic and foreign logistics companies such as SF Express, DHL, FEDEX, etc., to ensure that every shipment can be safely, timely, and efficiently delivered, allowing you to receive your goods without worry.
? 24/7 customer service, online response
You can contact us anytime and anywhere through email. Our professional team will be available 24 hours a day to answer your questions and provide attentive service.
Choosing us means choosing speed, quality, and trust!
Contact us immediately to embark on a new experience of efficient procurement! ✨
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.


Reviews
There are no reviews yet.